Published 19 November 2026 at 00:14
An inspector put the thermometer into the product at ten o’clock and noted 74 °C. The customer files a complaint about the batch the following week, and no one can show what happened in the middle of the oven, cold room or autoclave during the hours when no one was measuring. A manual spot check is a single moment. It says nothing about the progression, and the progression is usually what you are asked to prove.
What it is
The ETI ThermaData in stainless steel is a standalone temperature logger with a fixed penetration probe, Ø4.5 x 150 mm. The housing is made of food-grade 316 steel and meets IP66/67, so it withstands water, moisture, impacts and cleaning. The measuring range is -20 to 125 °C, the resolution 0.1 °C and the accuracy ±0.5 °C. The memory holds 16,000 readings, and the interval can be set from one second to 255 minutes. You unscrew the end cap, connect the supplied USB-C cable and read the data out to your computer.
Which problems it solves
The logger replaces notes from memory and spot checks with an unbroken curve. You set high and low alarm limits, choose to start by software, temperature or time, and after download you get an automatic PDF summary. With a one-minute interval the memory lasts just over eleven days, and with five minutes almost two months. A user ID of up to 31 characters means each run can be linked to a batch or a checkpoint.
How it is used in practice
In food production, the logger and its probe are placed in a product or a package and follow it through heat treatment and cooling. The curve shows how long the core actually stayed above the critical temperature, not just what the oven display claimed.
In pharmaceutical and laboratory operations, it is used to map heating cabinets, drying ovens and washer-disinfectors up to 125 °C. It is a way to show that the process holds its temperature over time and not just at a single check.
In quality and maintenance, it is placed in a truck, a corner of a cold or freezer room, or a hot transport container to investigate where and when the temperature deviates. In investigation and complaint work, it is often the first time anyone gets to see the whole progression.
Why it pays off
The cost of a scrapped batch or a failed audit quickly exceeds the price of the logger. You also save time. Nobody has to walk around taking readings at regular intervals, and the report takes a few minutes to produce instead of an afternoon of handwritten records. If you need formally traceable values, a three-point UKAS certificate is available as an option. Because the logger is sealed and robust, it can be reused for many years in environments where simpler models would fail.
If you need documented temperature rather than a single figure, this is a reasonable tool to start with. See specifications and options for the stainless steel ThermaData.