Published 15 October 2026 at 13:45
The paint has blistered, the component packaging is damp, or a delivery has been rejected because of condensation. Everyone checked the room on Friday and the values were normal. The problem is that a single measurement says little about what happened during the night or the weekend, when the ventilation was running at low speed and the temperature dropped.
An instrument with a memory
The SDL500 hygro-thermometer measures relative humidity, temperature, dew point and wet-bulb temperature. Unlike a simple read-out meter, it continuously saves the values to an SD card in Excel format. The logging interval is adjustable, and the card holds up to 20 million readings. If you only want to save individual points, there is a manual memory for 99 values. The instrument also has an input for type K and J thermocouples, so you can measure higher temperatures or surfaces with a separate probe. Min and max values can be recalled directly on the display.
Which problems does it solve
Above all, it solves what spot checks don’t reveal: short humidity peaks, slow drifts and daily variations. The dew point is particularly useful because it shows the temperature at which condensation forms. If you compare it with the surface temperature, you know whether the risk exists, not just whether the air feels damp. Because the data ends up in a spreadsheet, you can place it alongside process data and see when the deviation began.
Three situations where the logger proves its worth
Workshop and surface treatment. Before painting or bonding, the surface temperature should be a little above the dew point. With the logger in the room and a thermocouple probe on the workpiece, you can see how the margin changes during a shift.
Electronics. Moisture-sensitive components and circuit boards must be stored within specified limits. A logger in the warehouse or at the assembly line provides a curve showing whether the limits have been maintained, even during nights and weekends.
Food and cold storage. In dry stores, ripening rooms and packaging areas, humidity affects both shelf life and quality. The log provides documentation for your self-inspection and supporting evidence during audits.
Why it pays off
The cost of a single scrapped batch or a complaint often exceeds the price of the instrument. Without log data, troubleshooting becomes guesswork, and measures such as a new dehumidifier or altered ventilation are implemented on instinct. With a curve, you can instead measure before and after and see whether the measure made a difference. The model is delivered with a traceable NIST certificate, which helps when you need to show that your measurements are reliable. Allow approximately five weeks’ delivery time for certified versions. The instrument is delivered complete with SD card, probe, batteries and case.
If you need to be able to show what actually happened when nobody was on site, a logger is the simplest way to get answers.