Published 15 October 2026 at 00:25
You have surely been there: a machine stops, the fuse has tripped, and in front of you is a cabinet with thirty feeders. Which cable is running hot? You measure the current on one at a time, open more panels than you should, and all the while you are standing close to live parts. You can find the fault that way, but it takes time and it is not risk-free.
Current clamp and thermal camera in the same hand
The FLIR CM275 is a logging AC/DC current clamp with a built-in thermal camera. The method is called IGM, Infrared Guided Measurements. You start by looking at the object with the thermal camera and see where the temperature deviates. Only once you know which cable, which connector or which busbar is involved do you make the electrical measurement at that exact point.
The problems it solves
Overheating is often the first sign of an electrical fault: a loose connection, an overloaded phase or a worn connector. It is rarely visible to the naked eye. With the thermal camera you can inspect panels, cabinets and cables without physical contact, which reduces the risk when working near potentially live parts. The instrument also shows the temperature at the center point on the screen, so the image and the figure go together.
When and why it is used
The instrument is suited to troubleshooting, preventive maintenance rounds and checks after an installation. You measure current and voltage with the current clamp and multimeter functions and use the thermal image as a basis to confirm or rule out your suspicion. Measurement values and images can be transferred and organized, so the report can be created right out in the field.
Three real-world situations
Manufacturing industry: A CNC machine loses power intermittently. The thermal camera shows that one of the phase connections in the control cabinet is warmer than the others. The current measurement on that cable confirms the imbalance, and you tighten or replace the connector instead of replacing the motor unnecessarily.
Building operations: A ventilation fan keeps tripping. You go through the distribution board with the thermal camera and find the feeder that draws unusually high current and is hot, without having to open up the wiring.
Preventive maintenance: On the annual round in a production facility, you photograph electrical cabinets under normal load. The images are saved and can be compared next year, so that a component that is slowly getting hotter is detected in time.
Why it pays off
An unplanned stop usually costs more than the instrument, calculated per hour. By pinpointing the fault before you measure, you shorten troubleshooting time, and you avoid carrying two instruments and compiling the results afterwards. Documentation in the field saves administrative time and gives you something concrete to show in an insurance matter or an audit. Being able to determine from a distance what needs to be fixed also reduces the number of tasks where someone has to be close to live voltage.
If you want to see the specifications and the full description of the functions, they are available on the product page.