Published 13 October 2026 at 21:15
The truck arrives, the driver sticks a thermometer into a carton and it reads 3 °C. Everything looks fine. But was the temperature also 3 °C six hours ago, when the refrigeration unit was switched off during a stop? A single value says nothing about what happened beforehand, and that is often where complaints and unclear questions of responsibility arise.
What ThermaPod is
ThermaPod from ETI is a temperature logger in a USB stick format, 14.5 x 26 x 76 mm and 26 grams. It measures between -20 and +85 °C with a resolution of 0.1 °C and an accuracy of ±0.5 °C in the range -10 to 70 °C. Outside that range the deviation is ±1 °C. The logger stores up to 7,500 readings, and you choose the interval between measurements yourself, from 6 seconds to 255 minutes. An LCD display shows the current value, and the enclosure is splash-proof to IP65.
The problem it solves
The logger replaces guesswork with a curve. It measures continuously on its own, and when it is plugged into a computer the data can be read out quickly without having to install any software first. Free software is available for anyone who wants to analyze the course of events in more detail. A coin cell battery (CR2032) lasts for about 10,000 hours, so it can travel with a shipment unattended.
The measuring interval determines how long it lasts. With one measurement every ten minutes, the memory fills up in just over seven weeks. With one measurement per minute, it lasts just over five days. Choose the interval based on the length of the transport or monitoring period.
Three use cases
Food transport. Place the logger in the load at departure. On receipt, you read out the curve and see whether the cold chain was broken, for how long and when. It provides clear documentation to use against the carrier.
Cold rooms and freezer rooms. Place the logger in a suspected cold or warm spot for a few days. You can see whether the temperature fluctuates during defrosting or when the door is left open during loading, something an ordinary wall thermometer never shows.
Laboratory samples and sensitive goods. Samples sent between locations can be tracked from sender to recipient. Note that the measuring range ends at -20 °C, so for deep-frozen goods a different solution is needed.
Why it pays off
The price is around SEK 530, which should be weighed against the value of a single pallet that gets discarded or a delivery that nobody wants to take responsibility for. You also save time on internal checks, since you avoid manual readings several times a day. What used to be an impression becomes documentation, and the discussion about what happened becomes short.
If you need to be able to show that the temperature held, a logger in the load is a simple and inexpensive way to get the answer.