Published 21 November 2026 at 15:14
You suspect a crack in a welded joint behind a panel, or a blocked duct in a machine that is practically impossible to reach. The alternative is to spend an hour disassembling it, perhaps find nothing, and then reassemble everything. It is a cost many people recognize, and it can often be avoided by looking first.
What it is
This is an inspection camera with a semi-rigid probe that is 6 mm in diameter and 1 meter long. The camera head is waterproof and has four built-in LED lights with a dimmer, as well as a macro lens for glare-free close-ups. The tip is articulated and can be steered up to 320° from the handheld unit, so you can look around corners and not just straight ahead. The image is shown on a wireless handheld unit with a 5.7-inch color screen and a resolution of 640 x 480 pixels.
What problems it solves
The main problem is access. With a thin, steerable probe you can get into places that an inspection mirror or a flashlight cannot reach, and you get an image that can be documented. The wireless handheld unit lets you hold the screen where you can see it best, even when you are working in an awkward position. Images and video are saved to an SD card. The card can hold more than 14,600 images, and video recording of up to four hours can be supplemented with voice comments. This lets you explain what you see while you are looking.
When and why it is used
It is used when something needs to be assessed without being opened: during troubleshooting, preventive maintenance, final inspection and damage investigations. The documentation is just as important as the inspection itself. An image showing the condition before and after an action is better evidence than a verbal assessment.
Three areas of use
In the manufacturing industry, drilled channels, threaded holes and cylinder bores are inspected after machining. If a burr or a scratch is left on the surface, it is immediately visible without the part having to be cut open or scrapped.
In maintenance, the camera is used to inspect heat exchangers, pipe bends, pump housings and ventilation ducts. Being able to see deposits or corrosion on site makes it possible to plan a shutdown instead of being hit by an unplanned one.
In installation and plumbing, you can check the inside of a pipe, look for foreign objects or confirm that a concealed run really looks the way the drawing says. The video can be attached to the inspection report.
Why it pays off
The cost of disassembly is rarely the manual work itself. It is the downtime, the labor hours and the risk that something breaks during disassembly or reassembly. If the camera saves a couple of such operations per year, it has often paid for a large part of itself. In addition, documentation in the form of images and video reduces discussions with suppliers and customers about what was actually wrong.
The probe is semi-rigid, which means it keeps its shape as you feed it in, but it is not intended for long, winding runs. This is worth keeping in mind when you assess whether a one-meter probe is sufficient for your applications.
The camera is delivered with an SD card, rechargeable battery, power adapter, USB and AV cables, and a hard case, so it is ready to use right away.