Published 20 November 2026 at 08:28
The dishwasher display shows 82 °C, but no one knows for sure what actually hits the surface of the plate. The thermostat may be in the wrong place, a spray arm may be partly clogged, and a test strip stuck to a plate changes color at an approximate temperature. Anyone responsible for self-inspection has seen how uncertain things can get when the value has to be written down on paper and then serve as documentation during an inspection.
What DishTemp Blue is
ETI DishTemp Blue is a plate-shaped thermometer, 127 mm in diameter and 14 mm high, that is sent through the dishwasher together with the regular dishes. It measures the surface temperature throughout the whole cycle and stores the highest value. When the cycle is finished, you read the result, or transfer it via Bluetooth LE to an iOS or Android device within about six meters.
The measuring range is 0 to 90 °C with 0.1 °C resolution and an accuracy of ±0.5 °C. The housing is sealed to IP66 and therefore withstands the environment it is made for. A traceable calibration certificate is included.
What problems it solves
The problem with traditional methods is that they measure the wrong thing or measure it unreliably. A standard thermometer hung in the machine rarely stays in place and shows the water, not the surface. Test strips give a yes/no indication without an actual value and can only be used once. With DishTemp Blue you get a measured peak value on a surface that behaves like a plate, and you avoid handwritten readings that easily go wrong.
When and why it is used
It is used for routine checks, for example weekly or according to your self-inspection program, and at commissioning, after service and whenever something deviates. You compare the measured value with what the machine supplier or your HACCP program specifies for the final rinse. If the value is too low, you know it is the machine that needs to be examined, not the routines.
Three practical examples
Restaurant kitchen: The head chef places the thermometer in a rack between two plates, runs a normal program and reads the value. It takes a few minutes and the result is saved digitally.
Large-scale kitchen in a school or care facility: Several machines need to be checked according to the same routine. With Bluetooth transfer, the values are comparable between machines, and a machine that performs lower than the others is immediately visible.
Food production: Brown trays, containers and cutting boards are washed in a tunnel or rack machine. The thermometer shows whether the actual surface temperature is sufficient even at the outer edges of the machine, where the temperature is often lowest.
Why it pays off
Test strips have to be bought again and again, and every manual reading costs working time and carries a risk of error. DishTemp Blue is reusable, and the battery, a CR2032, lasts for about 40 hours of measuring. The biggest saving, however, is avoiding discovering a rinse that is too cold only at an inspection remark or after an outbreak. The documentation is saved and the calibration is traceable.
If you want to replace guesswork and test strips with a measured value that can be documented, you will find the thermometer and all specifications on the product page.