Hoppa till innehåll
Free shipping on orders over 3000 SEK excl. VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Reflections on shiny metal surfaces often hide the defect you are looking for, but a polarized digital microscope reveals itA Spot Check Shows Only One Moment: How to Document Core Temperature All the Way ThroughWhen a temperature measurement takes 0.4 seconds, it also gets done at every checkHow to know your thermometer reads correctly: check your own instruments against a reference with ±0.03 °C accuracyThe fridge never alarmed last night: how to detect temperature deviations before your goods are ruinedThe glare on the shiny surface hides the crack: how to see and measure the defect without guessingCarbon Dioxide Levels Reveal the Ventilation That Temperature Never ShowsWith 0.4-second readings, temperature checks become something you actually have time to doSee the fault behind the wall without having to take anything apart firstThe fault only showed up on Monday: how a humidity log reveals what happened over the weekendVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Reflections on shiny metal surfaces often hide the defect you are looking for, but a polarized digital microscope reveals itA Spot Check Shows Only One Moment: How to Document Core Temperature All the Way ThroughWhen a temperature measurement takes 0.4 seconds, it also gets done at every checkHow to know your thermometer reads correctly: check your own instruments against a reference with ±0.03 °C accuracyThe fridge never alarmed last night: how to detect temperature deviations before your goods are ruinedThe glare on the shiny surface hides the crack: how to see and measure the defect without guessingCarbon Dioxide Levels Reveal the Ventilation That Temperature Never ShowsWith 0.4-second readings, temperature checks become something you actually have time to doSee the fault behind the wall without having to take anything apart firstThe fault only showed up on Monday: how a humidity log reveals what happened over the weekend

Food-Simulating Sensors — A Slow Sensor Is the Whole Point, Because Food Is Slow Too

Published 22 August 2026 at 00:21

Almost all temperature monitoring in refrigerators and freezers measures the air. It is simple, inexpensive, and almost always the wrong question — because it is not the air that needs to stay cold, but the food. And air and food behave very differently: the air in a refrigerator is exchanged and heated within seconds when the door is opened, whereas a box of chilled goods barely notices it. The same applies during defrosting, during a brief power outage, and with every delivery that is loaded in.

The result is a log that alarms for things that never affected the product — and which in the worst case does so often enough that the alarms cease to be taken seriously. The question “did the food temperature rise?” simply cannot be answered by an air sensor.

ETI food-simulating NTC sensor with large measuring body 9 × 100 × 100 mm for refrigerator and freezer

What it is

An NTC thermistor sensor with a large measuring body — 9 × 100 × 100 mm — designed to mimic how a food product responds to temperature changes. The measuring range is −20 to 100 °C with an accuracy of ±0.4 °C, and it is supplied with a 1-meter cable and Lumberg connector.

The decisive specification is the one normally considered a drawback: slow response time.

The problem it solves

A temperature sensor’s response time is determined by its thermal mass relative to how quickly heat can be conducted into it. A thin needle sensor has almost no mass and therefore follows the air almost immediately. This sensor deliberately has a large, thick body — and thus an inertia close to that of a packaged food product.

The effect is that the curve reflects the product rather than the room. If the door is opened for two minutes, the air may rise by ten degrees; the simulant sensor moves only a fraction of that, just like the goods. However, if there is a genuine fault — the compressor stops, the door remains open for an hour, or the power is out overnight — then it rises, slowly and steadily, and that is when the alarm is justified.

This yields two concrete benefits that pull in different directions, which is why the method is worth the effort:

  • Fewer unnecessary disposals. When the log shows air peaks, they are often interpreted as a broken cold chain, and goods are discarded as a precaution. A simulant sensor shows that the product never came close to the limit — thereby saving goods that were fully usable.
  • Fewer missed genuine deviations. The opposite also exists: a freezer slowly losing capacity does not produce a dramatic air peak, but the product warms steadily. A slower sensor captures this development more clearly, as it is not drowned out by the noise created by door openings and defrost cycles.

To be clear: the sensor still measures itself, not the food. It is a model of a food product — designed to have approximately the right inertia — and the placement determines how good the model is. It should be located where the goods are, not in the air stream from the evaporator or nearest the door, unless that specific point is what one wants to monitor.

Three typical use cases

  • Refrigerated and frozen rooms in large kitchens and retail: continuous monitoring that reflects the actual temperature of the goods in self-control.
  • Medicines and vaccines: storage where both too high and too low temperatures are critical and where brief air fluctuations must not trigger disposal.
  • Investigation of deviations: when a log shows peaks and one needs to determine whether the product was actually affected or if it was just the air.

Why it pays off

Calculate what is unnecessarily discarded. A refrigerated or frozen room contains goods worth considerable sums, and the decision to discard is often made based on an alarm that no one can interpret — because the underlying data is air temperature and no one knows what the product did. A sensor that costs a few hundred kronor and makes the underlying data relevant pays for itself with the first batch that did not need to be thrown away.

And the other direction is more serious but less visible: goods that should have been discarded but were not, because the air had recovered before anyone looked at the log. That is the kind of error that is not discovered until someone gets sick — and the only thing that distinguishes the two outcomes is what the sensor actually measured.

Read more about food-simulating temperature sensors →

More news

All news