Published 22 November 2026 at 08:04
The cold room showed 4 °C when you went home. In the morning it shows 4 °C again, but a colleague noticed that the compressor was running strangely. Was the temperature above the limit during the night, and if so, for how long? Without recorded values you can only guess, and a guess holds up poorly in an audit or a complaint.
What it is
The USB temperature data logger is a small standalone unit that measures and stores the temperature at regular intervals. It stores up to 32,000 readings. The interval can be set from 2 seconds up to 24 hours, with steps such as 10 seconds, 1 minute, 10 minutes and 1 hour. When the measurement is finished, you connect the logger to a computer via USB and read out the temperature curve in the included Windows software.
The problem it solves
A handheld thermometer only shows the value right now. The data logger shows the whole course of events, including the hours when no one was there. You can program alarm levels, and a red or yellow LED shows whether the limit has been exceeded, while a green one shows that logging is in progress. This means you can see on the logger itself that something has happened, before you even open the computer.
The interval you choose determines how long the logger lasts. With one reading per minute, 32,000 values cover a little over three weeks. With one reading every five minutes, the memory lasts for over three months. The battery, a 3.6 V lithium battery, is designed for about one year of operation.
Three use cases
Food production and warehouses. Place the logger in the refrigerated or freezer area or in a transport box. The curve becomes the documentation that the cold chain was maintained, or of exactly when it was broken.
Workshop and maintenance. Paint shops, curing ovens and storage areas for adhesives and sealants often have temperature requirements. The logger reveals whether a heater switches off at night or whether the temperature drops over the weekend. These are things that otherwise only show up afterwards as uneven quality.
Installation and building services. When troubleshooting a hot water system or a heating circuit that works poorly from time to time, a log covering a few days gives an answer that a single reading can never give. You see both the level and the timing of the deviations.
Why it pays off
The cost of a logger is small compared with a shipment that has to be discarded, a repaint or a troubleshooting visit that has to be repeated. Without data, the decision is often to discard just to be safe. With a log, you can show that the limits were met, or pinpoint the exact hour when something went wrong. In addition, no one has to walk around reading a thermometer manually, which saves time every week.
Since the logger is delivered complete with battery, USB cover, holder and analysis software, it can be put to use the same day it arrives. Just check which interval suits how long the measurement is to run.
See the data sheet and order via the link below.